H. Yang, J.J. Kim, Y.B. Kim, K.C. Cho, J.H. Oh, “Investigation of Paraclinoid Aneurysm Formation by Comparing the Combined Influence of Hemodynamic Parameters Between Aneurysmal and Non-Aneurysmal Arteries,” Journal of Cerebral Blood Flow and Metabolism, In Press (2024)
S. Kim, H. Yang, J.H. Oh, Y.B. Kim, “Quantitative analysis of hemodynamic changes induced by the discrepancy between the sizes of the flow diverter and parent artery,” Scientific Reports, 14, 10653 (2024)
H. Yang, K.C. Cho, I. Hong, Y. Kim, Y.B. Kim, J.J. Kim, J.H. Oh, “Influence of Circle of Willis Modeling on Hemodynamic Parameters in Anterior Communicating Artery Aneurysms and Recommendations for Model Selection,” Scientific Reports, 14, 8476 (2024)
C. Cho, C. Lee, J.H. Oh, “Wearable Self-powered Pressure Sensing Device based on a Combination of Carbon Nanotubes/porous Poly(dimethyl siloxane) and Poly(ethylene oxide),” ACS Applied Nano Materials, 7, 5040–5050 (2024)
C. Lee, S. Park, C. Cho, J.H. Oh, “Improvement in the electrical performance of poly(ethylene oxide) nanofiber-based triboelectric nanogenerators by introducing sodium chlorides,” ACS Applied Electronic Materials, 5, 6047–6055 (2023)
H. Yang†, K.C. Cho†, J.J. Kim, Y.B. Kim, and J.H. Oh, “New morphological parameter for intracranial aneurysms and rupture risk prediction based on artificial neural networks.” Journal of NeuroInterventional Surgery, 15, e209-e215 (2023)
T.H. Lee, D.H. Kam, J.H. Oh, C. Kim, “Observation of Arc and Metal Transfer Behavior according to Shielding Gas in the WAAM of Ti–6Al–4V Alloy Using the Pulsed Gas Metal Arc Process,” Welding Journal, Vol. 102, No. 10, 265–278 (2023)
Y. Kim, H. Yang, K.C. Cho, J.J. Kim, Y.B. Kim, and J.H. Oh, “3D-Printed Patient-Specific Circles of Willis with an Intracranial Aneurysm and their Application to Neurointerventional Endovascular Simulator.” Advanced Materials Technologies, 8, 2201783 Back Cover (2023)
C. Lee, C. Cho, J.H. Oh, “Highly flexible triboelectric nanogenerators with electrospun PVDF-TrFE nanofibers on MWCNTs/PDMS/AgNWs composite electrodes,” Composites Part B: Engineering, 255, 110622 (2023)
C. Cho, D. Kim, C. Lee, J.H. Oh, “Ultra-sensitive ionic liquid polymer composites with convex and wrinkled microstructure and their application as wearable pressure sensors,” ACS Applied Materials & Interfaces, 15, 13625-13636 (2023)
H. Yang, I. Hong, Y.B. Kim, K.C. Cho and J.H. Oh, “Influence of blood viscosity models and boundary conditions on the computation of hemodynamic parameters in cerebral aneurysms using computational fluid dynamics.”, Acta Neurochirurgica, 165, 471-482 (2023)
H. Yang†, K.C. Cho†, J.J. Kim, J.H. Kim, Y.B. Kim, and J.H. Oh, “Rupture risk prediction of cerebral aneurysms using a novel convolutional neural network-based deep learning model.” Journal of NeuroInterventional Surgery, 15(2), 200-204 (2023)
T.H. Lee, C. Kim, J.H. Oh, D.H. Kam, “Visualization of Cathode spot control using laser irradiation and oxide addition in wire arc additive manufacturing of Titanium alloys,” Journal of Laser Applications, 34, 042024 November (2022)
J. Nam, D. Kim, J.H. Oh, “Investigation of the fastening behavior of self-tapping plastic joints with various supporting ribs.” Journal of Manufacturing Processes, 82, 425-433 (2022)
T.H. Lee, M. Kang, J.H. Oh, D.H. Kam, “Deposition quality and efficiency improvement method for additive manufacturing of Ti–6Al–4V using gas metal arc with CMT,” Journal of Materials Processing Technology, 308, 117720 (2022)
T.H. Lee, D.H. Kam, J.H. Oh, C. Kim, “Ti–6Al–4V alloy deposition characteristics at electrode-negative polarity in the cold metal transfer–gas metal arc process,” Journal of Materials Research and Technology, 19, 685-696 (2022)
J. Nam, D. Kim, K.
Kim, S. Choi, and J.H. Oh, "Unified Fatigue Life Prediction of
Bolts with Different Sizes and Lengths under Various Axial Loading
Conditions." Engineering Failure Analysis, 131, 105841 (2022)
Y. Kim, X. Wu, C.
Lee, and J.H. Oh, "Characterization of PI/PVDF-TrFE
Composite Nanofiber-Based Triboelectric Nanogenerators Depending on the Type of
the Electrospinning System." ACS Applied Materials &
Interfaces, 13, 36967-36975 (2021)
S. Kim†, H. Yang†,
I. Hong, J.H. Oh, and Y. B. Kim, "Computational Study of
Hemodynamic Changes Induced by Overlapping and Compacting of Stents and Flow
Diverter in Cerebral Aneurysms." Frontiers in Neurology, 12, 705841 (2021)
J. J. Kim†, H. Yang†, Y. B. Kim, J.H. Oh, and K. C. Cho, "The quantitative comparison between high wall shear stress and high strain in the formation of paraclinoid aneurysms." Scientific reports, 11, 1-8 (2021)
J. Hwang, Y. Kim,
H. Yang, and J.H. Oh, "Fabrication of hierarchically porous
structured PDMS composites and their application as a flexible capacitive
pressure sensor." Composites Part B: Engineering, 211, 108607 (2021)
Y. Kim, H. Yang and J.H. Oh, “Simple fabrication of highly sensitive capacitive pressure sensors using a porous dielectric layer with cone-shaped patterns,” Materials & Design, 197, 109203 (2021)
K.C. Cho†, H. Yang†, J.J. Kim, J.H. Oh and Y.B. Kim, “Prediction of rupture risk in cerebral aneurysms by comparing clinical cases with fluid-structure interaction analyses,” Scientific Reports, 10, 18237 (2020)
Y. Kim and J.H. Oh, “Recent Progress in Pressure Sensors for Wearable Electronics: From Design to Applications,” Applied Sciences, 10(18), 6403, (2020)
Y. Kim, X. Wu and J.H. Oh, “Fabrication of triboelectric nanogenerators based on electrospun polyimide nanofibers membrane,” Scientific Reports, 10, 2742 (2020)
C. Lee, S.G. Ryu and J.H. Oh, “Optimum design of a 740 mm-long lens mount for a large-area and high-speed line beam proximity exposure,” Optik - International Journal for Light and Electron Optics 208, 164058 (2020)
H. Cho, S. Nam, I. Hwang, J.H. Oh, M. Kang and Y.M. Kim, “Fatigue Behaviors of Resistance Spot Welds for 980 MPa Grade TRIP Steel,” Metals, 9(10), 1086 (2019)
S. Jang, Y. Kim, S. Lee and J.H. Oh, "Optimization of Electrospinning Parameters for Electrospun Nanofiber‑Based Triboelectric Nanogenerators", International Journal of Precision Engineering and Manufacturing-Green Technology, 6, 731-739 (2019)
C. Lee, J.W. Lee, S.G. Ryu and J.H. Oh, “Optimum design of a large area, flexure based XYθ mask alignment stage for a 12-inch wafer using grey relation analysis,” Robotics and Computer Integrated Manufacturing, 58, 109-119 (2019)
Y. Kim, S. Jang and J.H. Oh, "Fabrication of highly sensitive capacitive pressure sensors with porous PDMS dielectric layer via microwave treatment", Microelectronic Engineering, 215, 111002 (2019)
S. Jang, J. Nam, S. Lee and J.H. Oh, "A Simple, Reusable and Low-Cost LVDT-Based in Situ Bolt Preload Monitoring System during Fastening for a Truck Wheel Assembly", Metals, 9(3), 336 (2019)
S. Jang and J.H. Oh, "Rapid Fabrication of Microporous BaTiO3/PDMS Nanocomposites for Triboelectric Nanogenerators through One-step Microwave Irradiation", Scientific Reports, 8, 14287 (2018)
K.C. Cho, J.H. Choi, J.H. Oh, and Y.B. Kim, "Prediction of Thin-Walled Areas of Unruptured Cerebral Aneurysms through Comparison of Normalized Hemodynamic Parameters and Intraoperative Images", BioMed Research International, 2018, 3047181 (2018)
J.H. Oh, “Editorial: Special issue on Printed Electronics 2017,” Applied Sciences, 8(7), 1089 (2018)
J.S. Kwon, D.J. Lee and J.H. Oh, “Formation and characterization of inkjet-printed nanosilver lines on plasma-treated glass substrates,” Applied Sciences, 8(2), 280 (2018)
J.S. Kwon and J.H. Oh, “Review: Microfluidic technology for cell manipulation,” Applied Sciences, 8(6), 992 (2018)
Y. Kim, J. Lee and J.H. Oh, “Fabrication of fine metal patterns using an additive material extrusion process with a molten metal,” Microelectronic Engineering, 191, 10-15 (2018)
Y. Kim, S. Jang, B. J. Kang and J.H. Oh, "Fabrication of highly-sensitive capacitive pressure sensors with electrospun polymer nanofibers", Applied Physics Letters, 111, 073502 (2017)
S. Jang†, H. Kim† and J.H. Oh, "Simple and Rapid Fabrication of Pencil-on-paper Triboelectric Nanogenerators with Enhanced Electrical Performance", Nanoscale, 9, 13034-13041 (2017)
C. Lee, B.J. Kang and J.H. Oh, "High-resolution conductive patterns fabricated by inkjet printing and spin coating on wettability-controlled surfaces", Thin Solid Films, 616, 238-246 (2016)
S. Jang, H. Kim, Y. Kim, B.J. Kang and J.H. Oh, " Honeycomb-like nanofiber based triboelectric nanogenerator using self-assembled electrospun poly(vinylidene fluoride-co-trifluoroethylene) nanofibers", Applied Physics Letters, 108, 143901 (2016)
S. Jang, Y. Kim and J.H. Oh, "Influence of processing conditions and material properties on electrohydrodynamic direct patterning of a polymer solution", Journal of Electronic Materials, 45, 2291-2298 (2016)
B.J. Kang and J.H. Oh, "Influence of substrate temperature and overlap condition on the evaporation behavior of inkjet-printed semiconductor layers in organic thin film transistors", Thin Solid Films, 598, 219-225 (2016)
H.S. Yang, B.J. Kang and J.H. Oh, "Control of evaporation behavior of an inkjet-printed dielectric layer using a mixed-solvent system", Journal of Electronic Materials, 45, 775 (2016)
Y. Hua, Y.B. Kim and J.H. Oh, “Influence of geometrical characteristics of sidewall-type multiple aneurysms on hemodynamic factors,” Advances in Mechanical Engineering, 7, No. 6, 1-12 (2015)
Y. Hua, J.H. Oh and Y.B. Kim, “Influence of Parent Artery Segmentation and Boundary Conditions on Hemodynamic Characteristics of Intracranial Aneurysms,” Yonsei Medical Journal, 56, No. 5, 1328-1337 (2015)
B.J. Kang and J.H. Oh, "Control of the crystalline structure of inkjet-printed semiconductor layers using overlap condition and surface wettability", Journal of Micromechanics and Microengineering, 25 (5), 055011 (2015)
Y. Kim, S. Jang and J.H. Oh, "High-resolution electrohydrodynamic printing of silver nanoparticle ink via commercial hypodermic needles", Applied Physics Letters, 106 (1), 014103 (2015)
B.J. Kang, K. Shin and J.H. Oh, "Influence of bottom electrode configuration on crystalline structures of 6,13-bis(triisopropylsilylethynyl) pentacene films for all-inkjet-printed organic thin film transistors", The Japan Society of Applied Physics, 53 (5), 05HB09 (2014)
J. Sung, B.J. Kang and J.H. Oh, “Fabrication of high-resolution conductive lines by combining inkjet printing with soft lithography,” Microelectronic Engineering, 110, 219-223 (2013)
S. Jang, D.J. Lee, D. Lee and J.H. Oh, “Electrical Sintering Characteristics of Inkjet-printed Conductive Ag Lines on a Paper Substrate,” Thin Solid Films, 546, 157-161 (2013)
H.Y. Park, B.J. Kang, D. Lee and J.H. Oh, “Control of Surface Wettability for Inkjet Printing by Combining Hydrophobic Coating and Plasma Treatment,” Thin Solid Films, 546, 162-166 (2013)
S.H. Lee, Y.H. Kim, J. Sung, K.C. Shin and J.H. Oh, “Investigation of contact force distributions and dynamic behavior of an automobile windshield wiper blade system,” Proceedings of the Institution of Mechanical Engineer, Part D: Journal of Automobile Engineering, 227 (7), 1040-1052 (2013)
S.H. Park, S. Jang, D. J. Lee, J.H. Oh and H.S. Kim, “Two-step flash light sintering process for crack free inkjet-printed Ag films", Journal of Micromechanics and Microengineering, 23, 015013 (2013)
S.H. Lee, D.J. Lee, C.K. Lee, Y.H. Lee, S.T. Wereley and J.H. Oh, “Direct fabrication of microelectrodes on a polymer substrate using selective ultrashort pulsed laser ablation of inkjet-printed Ag lines”, physica status solidi A, 209 (11), 2142-2146 (2012)
B.J. Kang, C. Lee, J.H. Oh, "All-inkjet-printed electrical components and circuit fabrication on a plastic substrate", Journal of Microelectronic Engineering, 97, 251-254 (2012)
H.I. Yoon, J.S. Choi, B.K. Lee, J.H. Oh and Y.W. Cho, “Arbitrary, Complex Cell Patterning via Inkjet Printing of a Cell Membrane-Anchoring Polymer,” Macromolecular Research, 20 (5), 528-533 (2012)
D.J. Lee, S.H. Park, S. Jang, H.S. Kim, J.H. Oh and Y.W. Song, “Pulsed light sintering characteristics of inkjet-printed nanosilver films on a polymer substrate”, Journal of Micromechanics and Microengineering, 21, 125023 (2011)
J.H. Oh and S.H. Lee, “Prediction of Surface Roughness in Magnetic Abrasive Finishing Using Acoustic Emission and Force Sensor Data Fusion,” Proceedings of the Institution of Mechanical Engineers, Part B: J. of Eng. Manu., 225, 853-865 (2011)
B.J. Kang, Y.S. Kim, Y.W. Cho and J.H. Oh, “Effects of Plasma Surface Treatments on Inkjet-Printed Feature Sizes and Surface Characteristics,” Microelectronics Engineering, 88, 2355-2358 (2011)
K.Y. Shin, S.H. Lee and J.H. Oh, “Solvent and substrate effects on inkjet-printed dots and lines of silver nanoparticle colloids,” Journal of Micromechanics and Microengineering, 21, 045012 (2011)
S.B. Quang Tran, D. Byun, H.T. Yudistira and J.H. Oh, “Semi-Analytical Study of Hemispherical Meniscus Oscillation with an Anchored Edge on a Conductive Flat Plate under an AC Electric Field,” Physics of Fluids, 23, 022006 (2011)
B.J. Kang and J.H. Oh, “Influence of C4F8 plasma treatment on size control of inkjet-printed dots on a flexible substrate,” Surface and Coatings Technology, 205, pp. S158S163 (2010)
D.J. Lee and J.H. Oh, “Inkjet printing of conductive Ag lines and their electrical and mechanical characterization,” Thin Solid Films, 518, Issue 22, pp. 6352-6356 (2010)
D.J. Lee and J.H. Oh, “Shapes and Morphologies of Inkjet-printed Nanosilver Dots on Glass Substrates,” Surface and Interface Analysis, 42, pp. 1261-1265 (2010)
N.K. Kang, T.S. Jun, D.-D. La, J.H. Oh, Y.W. Cho, Y.S. Kim, “Evaluation of the limit-of-detection capability of carbon black-polymer composite sensors for volatile breath biomarkers,” Sensors and Actuators B: Chemical, Vol. 147, pp. 55-60 (2010)
K.J. Lee, N. Kim, S. Hong, K. Lee, D. Lee, J.H. Oh, Y. Byun and Y. Choa, “Fabrication and Ink-Jet Patterning of Copper Nanoparticles with Improved Dispersion Stability,” Journal of Nanoscience and Nanotechnology, Vol. 10, No. 5, pp. 3350-3353 (2010)
D.J. Lee, J.H. Oh and H.S. Bae, “Crack formation and substrate effects on electrical resistivity of inkjet-printed Ag lines,” Materials Letters, Vol. 64, No. 9, pp. 1069-1072 (2010)
J.H. Oh and S.Y. Lim, “Precise Size Control of Inkjet-Printed Droplets on a Flexible Polymer Substrate using Plasma Surface Treatment,” Journal of Micromechanics and Microengineering, Vol. 20, pp. 015030 (2010)
B.J. Kang and J.H. Oh, “Geometrical Characterization of Inkjet-Printed Conductive Lines of Nanosilver Suspensions on a Polymer Substrate,” Thin Solid Films, Vol. 518, pp. 2890-2896 (2010)
J. Park, D.J. Lee, S.J. Kim and J.H. Oh, “Dynamic Characteristics Measurements of Inkjet-printed Thin Films of Nanosilver Suspensions on a Flexible Plastic Substrate,” Journal of Micromechanics and Microengineering, Vol. 19, 095021 (2009)
J. H. Oh, “Torque Capacity of Tubular Adhesive Joints with Different Composite Adherends,” Materials Letters, Vol. 62, No. 8-9, pp. 1234-1237 (2008)
J. H. Oh, “Prediction of Temperature Distribution during Curing Thick Thermoset Composite Laminates,” Materials Science Forum, Vol. 544 - 545, pp. 427 - 430 (2007)
J. H. Oh, “Effect of Adhesive Thickness and Bonding Length on Behavior of Composite Adhesive Joints subject to Torsion,” Solid State Phenomena, Vol. 124 -126, pp. 1313 - 1316 (2007)
J. H. Oh, “Strength Prediction of Tubular Composite Adhesive Joints under Torsion,” Composites Science and Technology, Vol. 67, No. 7-8, pp. 1320-1329 (2007)
J. H. Oh, “Nonlinear Analysis of Adhesively Bonded Tubular Single-Lap Joints for Composites in Torsion,” Composites Science and Technology, Vol. 67, No. 7-8, pp. 1320 - 1329 (2007)
K. K. Jin, J. H. Oh and S. K. Ha, “Effect of Fiber Arrangement on Residual Thermal Stress Distributions in a Unidirectional Composite,” Journal of Composite Materials, Vol. 41, No. 5, pp. 591-611 (2007)
J. H. Oh, K. K. Jin and S. K. Ha, “Interfacial Strain Distribution of a Unidirectional Composite with Randomly Distributed Fibers under Transverse Loading,” Journal of Composite Materials, Vol. 40, No. 9, pp. 759-778 (2006)
C. S. Lee, D. G. Lee, and J. H. Oh, “Co-cure Bonding Method for Foam Core Composite Sandwich Manufacturing,” Composite Structures, Vol. 66, No. 1-4, pp. 231-238 (2004)
C. S. Lee, D. G. Lee, J. H. Oh and H. S. Kim, “Composite Wrist Blocks for Double Arm Type Robots for Handling Large LCD Glass Panels,” Composite Structures, Vol. 57, No. 1-4, pp. 345-355 (2002)
J. H. Oh and D. G. Lee, “Cure Cycle for Thick Glass/Epoxy Laminates,” Journal of Composite Materials, Vol. 36, No. 1, pp. 19-46 (2002)
C. S. Lee, J. H. Oh, D. G. Lee and J. H. Choi, “Composite Cantilever Arm for Guiding a Moving Wire in an Electrical Discharge Wire Cutting Machine,” Journal of Material Processing Technology, Vol. 113, No. 1-3, pp. 172-177 (2001)
D. G. Lee, C. S. Lee, J. H. Oh and H. S. Cheon, “Composite Heddle Frames for High Speed Looms,” Composite Structures, Vol. 47, pp. 507-517 (1999)
J. H. Oh, D. G. Lee and H. S. Kim, “Composite Robot End Effector for Manipulating Large LCD Glass Panels,” Composite Structures, Vol. 47, pp. 497-506 (1999)
D. G. Lee and J. H. Oh, “Nonlinear Analysis of the Torque Transmission Capability of Adhesively Bonded Tubular Lap Joints,” Journal of Adhesion, Vol. 71, pp. 81-106 (1999)
J. H. Oh, J. K. Kim, D. G. Lee and K. S. Jeong, “Interlaminar Shear Behavior of ThickCarbon/Epoxy Composite Materials,” Journal of Composite Materials, Vol. 33, No. 22, pp. 2080-2115 (1999)
Y. G. Kim, J. H. Oh, and D. G. Lee, “Strength of Adhesively-Bonded Tubular Single Lap Carbon/Epoxy Composite-Steel Joints,” Journal of Composite Materials, Vol. 33, No. 20, pp. 1987-1917 (1999)
J. H. Oh, D. G. Lee and T. R. Kim, “Composite Nozzle Dam in the Steam Generator of a Nuclear Reactor,” Composite Structures, Vol. 38, pp. 203-213 (1997)
J. H. Oh, Y. G. Kim and D. G. Lee, “Optimum Bolted Joints for Hybrid Composite Materials,” Composite Structures, Vol. 38, pp. 329-341 (1997)
J. H. Oh, D. G. Lee and S. J. Lee, “Manufacture of an Alumina Liner-Steel Sleeve under High Pressure and Temperature,” International Journal of Machine Tools & Manufacture, Vol. 37, No. 10, pp. 1511-1523 (1997)
