D. Kim, J. Nam, J. Yixuan and J.H. Oh, “Investigation of the Effect of Bolt Twisting Resulting From Fastening Process on Self-Loosening Behavior of Bolted Joint,” ASME 2023 International Mechanical Engineering Congress & Exposition (IMECE 2023), Session 12-02-01: Modeling of the Fracture, Failure, and Fatigue in Solids, New Orleans, USA (Oct. 29 – Nov. 2, 2023)
D. Kim, J. Nam and J.H. Oh, “The Effect of Bone Mineral Density and Diameter of Implant Fixture on Osseointegration of Dental Implant Using Finite Element Analysis,” ASME 2023 International Mechanical Engineering Congress & Exposition (IMECE 2023), Session 06-09-04: Computational Modeling in Biomedical Applications – IV, New Orleans, USA (Oct. 29 – Nov. 2, 2023)
C. Cho, C. Lee and J.H. Oh, “Highly sensitive pseudo-capacitive iontronic pressure sensor with MXene electrode to enhance ion intercalation,” Book of Abstract of the 49th International Conference on Micro and Nano Engineering (MNE 2023), Oral S72-T4-3, Berlin, Germany (Sep. 25 – 28, 2023
J.H. Oh, C. Lee and C. Cho, “Fabrication of self-powered wearable pressure sensing system based on PVDF-TrFE and ionic liquid,” Book of Abstract of the 49th International Conference on Micro and Nano Engineering (MNE 2023), Oral S24-T4-3, Berlin, Germany (Sep. 25 – 28, 2023)
J.H. Oh, “(Invited) CFD and FSI analyses of cerebral aneurysms considering vessel wall structure,” East Asian Conference of Neurointervention (EACoN) 2022, Session 2 Update of Endovascular Treatment of Intracranial Aneurysm, Seoul, Korea (Dec. 9 – Dec. 10, 2022)
Y. Kim, H. Yang, K.-C. Cho, J.-J. Kim and J.H. Oh “Manufacturing Realistic Cerebrovascular Replica With an Intracranial Aneurysm and Their Application to Neurointerventional Endovascular Simulation,” ASME 2022 International Mechanical Engineering Congress & Exposition (IMECE 2022), Session: 05-05-02 Biomedical Devices – II, Columbus, USA (Oct. 30 – Nov. 3, 2022)
H. Yang, J.-J. Kim, Y.B. Kim, K.-C. Cho and J.H. Oh, “Investigation of Combined Influence of Hemodynamic Parameters on Intracranial Aneurysm Formation by Performing Computer-Simulations on Aneurysmal and Non-Aneurysmal Paraclinoid Arteries,” ASME 2022 International Mechanical Engineering Congress & Exposition (IMECE 2022), Session 05-09-03: Computational Modeling in Biomedical Applications – III, Columbus, USA (Oct. 30 – Nov. 3, 2022)
C. Lee, S. Park, C. Cho and J.H. Oh, “Improvement in the electrical performance of polyethylene oxide-based triboelectric nanogenerators by introducing sodium chloride,” Book of Abstract of the 48th International Conference on Micro and Nano Engineering (MNE 2022), Poster T3-P1-TuA-038, Leuven, Belgium (Sep. 19 – 23, 2022)
C. Cho and J.H. Oh, “Wearable self-powered capacitive pressure sensor based on triboelectric effect via a combination of porous PDMS/CNTs and poly(ethylene oxide),” Book of Abstract of the 48th International Conference on Micro and Nano Engineering (MNE 2022), Oral: T3-C-TuA, Leuven, Belgium (Sep. 19 – 23, 2022)
H. Yang, K.C. Cho, J.J. Kim, J.H. Kim, Y.B. Kim, and J.H. Oh “A Novel Deep Learning Model Based On Hemodynamic Analysis For Predicting The Rupture Risk Of Cerebral Aneurysms.” America Stroke Association International Stroke Conference (ISC 2022), Session: Risk Factors and Prevention WP190, Los Angeles, USA (Feb. 9 – Feb. 11, 2022)
C. Cho, Y. Kim and J.H. Oh, “Ultra-sensitive ionic capacitive pressure sensors based on wrinkled microstructures on convex patterns,” Book of Abstract of the 47th International Conference on Micro and Nano Engineering (MNE 2021), PC41, Turin, Italy (Sep. 20 – 23, 2021)
C. Lee, Y. Kim and J.H. Oh, “Highly flexible triboelectric nanogenerators based on directly electrospun nanofibers on MWCNT/PDMS composite electrodes,” Book of Abstract of the 47th International Conference on Micro and Nano Engineering (MNE 2021), PC40, Turin, Italy (Sep. 20 – 23, 2021)
Y. Kim, J. Hwang and J.H. Oh, “Simple fabrication of highly sensitive capacitive pressure sensors using a porous dielectric layer with cone-shaped patterns,” Book of Abstract of the 45th International Conference on Micro and Nano Engineering (MNE 2019), C4-3, Rhodes, Greece (Sep. 23 – 27, 2019)
Y. Kim, X. Wu and J.H. Oh, “Fabrication of electrospun polyimide nanofibers and their application in triboelectric nanogenerators,” Book of Abstract of the 45th International Conference on Micro and Nano Engineering (MNE 2019), C5-4, Rhodes, Greece (Sep. 23 – 27, 2019)
C. Lee, H. Yang, S.G. Ryu and J.H. Oh, “Optimum design of a 740 mm-long lens mount for fast line-beam proximity exposure process producing fine patterns with 5 um width,” Book of Abstract of the 45th International Conference on Micro and Nano Engineering (MNE 2019), PA70, Rhodes, Greece (Sep. 23 – 27, 2019)
Y. Kim, S. Jang and J.H. Oh, “Fabrication of stretchable capacitive multi‐sensors using molten metal printing,” Book of Abstracts of the 44th International Conference on Micro and Nano Engineering (MNE 2018), PO328, Copenhagen, Denmark (Sep. 24-27, 2018)
S. Jang, S. Lee, Y. Kim and J.H. Oh, “Optimization of electrospun nanofiber‐based triboelectric nanogenerators using design of experiments,” Book of Abstracts of the 44th International Conference on Micro and Nano Engineering (MNE 2018), PO297, Copenhagen, Denmark (Sep. 24-27, 2018)
Y. Kim, J. Lee and J.H. Oh, “Fabrication of Pressure Sensor with Electrospun Poly(Vinylidenefluorideco-trifluoroethylene),” Book of Abstracts of the 1st Emerging Technologies in Mechanical Engineering (ETME 2018), TuC3.1, p. 196, Jeju, Korea (Aug. 19-22, 2018)
J. Nam, J.H. Oh and H.S. Kim, “Fastening Behavior of a Metal Screw for Plastic Joints,” Book of Abstracts of the International Symposium on Precision Engineering and Sustainable Manufacturing 2018 (PRESM 2018), OP062, p.386, Sapporo, Japan (Jul. 3-7, 2018)
G. Choi, J.H. Oh and J. Kwon, “Design of Plastic Region Tightening Bolts for Automotive Applications,” Book of Abstracts of the International Symposium on Precision Engineering and Sustainable Manufacturing 2018 (PRESM 2018), OP063, p.385, Sapporo, Japan (Jul. 3-7, 2018)
S. Jang and J. H. Oh, "Novel fabrication method of highly porous polymer-based triboelectric nanogenerators via microwave irradiation", 43rd International Conference on Micro and Nano Engineering (MNE 2017), Braga, Portugal, Sept., 2017
Y. Kim, S. Jang, C. W. Lee, J. Lee and J. H. Oh, "Design of a Three-dimensional Metal Printing System with a Volumetric Nozzle and Fabrication of Conductive Fine Patterns", International Symposium on Green Manufacturing and Applications (ISGMA 2017), Gyeongju, Korea, Jun., 2017
C. Lee, D. Lee, S. G. Ryu and J. H. Oh, "Finite element and experimental analyses of a large area, ultra-precision XY linear stage with reaction force compensation system", International Symposium on Green Manufacturing and Applications (ISGMA 2017), Gyeongju, Korea, Jun., 2017
J. H. Choi, J. H. Oh, H. Jeon, K. Cho, Y. B. Kim, "Prediction of potential rupture areas of cerebral aneurysms using computational fluid dynamics", International Symposium on Green Manufacturing and Applications (ISGMA 2017), Gyeongju, Korea, Jun., 2017
S. Jang, S. Lee, M. W. Choi, K. W. Na, and J. H. Oh, "Simple and precise LVDT-based in-situ bolt tension monitoring system for truck wheel nuts", International Symposium on Green Manufacturing and Applications (ISGMA 2017), Gyeongju, Korea, Jun., 2017
H. Kim, S. Jang, and J. H. Oh, "Simple Two-step Fabrication of a Paper-based Triboelectric Nanogenerator", 42nd International Conference on Micro and Nano Engineering (MNE 2016), Vienna, Austria, Sept., 2016
S.
Jang, H. Kim, Y. Kim, and J. H. Oh,"Fabrication of carbon fabric and polymer
nanofibers composite for triboelectric nanogenerator through electrospinning",
Composites Seoul 2015, Seoul, Korea, Oct., 2015
S. Jang, H. Kim, Y. Kim,
and J. H. Oh," Triboelectric
nanogenerator with honeycomb-like nanofiber microstructures", 41st International
Conference on Micro and Nano
Engineering (MNE 2015), Hague, Netherlands, Sept., 2015
S. Jang, Y. Kim, H. Kim,
and J. H. Oh," Highly sensitive
capacitive pressure sensors with electrospun polymer nanofibers", 41st
International Conference on Micro and Nano
Engineering (MNE 2015), Hague, Netherlands, Sept., 2015
B. J. Kang and J. H. oh,"All-inkjet-printed top contact organic thin film transistors with a hole-injection layer", 40th International Conference on Micro & Nano Engineering (MNE 2014), Lausanne, Swiss, Sept., 2014
S. Jang, Y. Kim and J. H. oh,"Precise deposition of sub-100 nm nanofibers by electrohydrodynamic direct writing", 40th International Conference on Micro & Nano Engineering (MNE 2014), Lausanne, Swiss, Sept., 2014
C. K. Lee, B. J. Kang and J. H. oh,"High?resolution conductive patterns fabricated by various patterning methods based on soft?lithography", 39th International Conference on Micro & Nano Engineering (MNE 2013), London, United Kingdom, Sept., 2013
B. J. Kang, S. Jang and J. H. Oh, "Effect of different surface wettabilities on electrohydrodynamic printing behaviour", 39th International Conference on Micro & Nano Engineering (MNE 2013), London, United Kingdom, Sept. 2013
B. J. Kang, S. Jang and J. H. Oh, "Effect of different surface wettabilities on electrohydrodynamic printing behaviour", 39th International Conference on Micro & Nano Engineering (MNE 2013), London, United Kingdom, Sept. 2013
J. S. Sung and J. H. oh, "High-resolution inkjet printing of well-defined Ag lines assisted by soft lithography", 38th International Conference on Micro & Nano Engineering (MNE 2012), Toulouse, France, Sept., 2012
B. J. Kang and J. H. Oh,"All-inkjet-printed electric components and circuits on a flexible substrate",37th International Conference on Micro & Nano Engineering (MNE 2011), Berlin, Germany, Sept., 2011
D. J. Lee and J. H. Oh,"Inkjet-printed nanosilver lines on glass substrates with different surface wettabilities",37th International Conference on Micro & Nano Engineering (MNE 2011),Berlin, Germany,Sept., 2011
D.J. Lee and J.H. Oh, “Selective ablation of inkjet-printed Ag thin films on a flexible substrate with a picosecond laser,” Book of Abstracts of the 36th International Conference on Micro & Nano Engineering (MNE 2010), Genoa, Italy (Sept., 2010)
B.J. Kang and J.H. Oh, “Effect of different plasma surface treatments on the inkjet-printed feature size,” Book of Abstracts of the 36th International Conference on Micro & Nano Engineering (MNE 2010), Genoa, Italy (Sept., 2010)
D.J. Lee, J.H. Oh, “Shapes and Morphologies of Inkjet-printed Nanosilver Dots on Glass Substrates,” Book of Abstracts of 13th European Conference on Applications of Surface and Interface Analysis (ECASIA’09), pp. 322, Turkey (Oct. 2009)
D.J. Lee, P.S. Oh, J.H. Oh, “Electrical Resistivities of Inkjet-printed Ag Tracks on Different Substrates,” Book of Abstracts of 13th European Conference on Applications of Surface and Interface Analysis (ECASIA’09), pp. 298, Turkey (Oct. 2009)
D.J. Lee, J.H. Oh, “Inkjet Printing of Narrow Ag Tracks and Their Mechanical and Electrical Characterization,” Book of Abstracts of the 2nd International Conference on Microelectronics and Plasma Technology (ICMAP 2009)
B.J. Kang, J.H. Oh, “Influence of C4F8 Plasma Treatment on the Size Control of Inkjet-printed Dots on a Flexible Substrate,” Book of Abstracts of Seventh Asian-European International Conference on Plasma Surface Engineering (AEPSE 2009)
S.K. Oh, H.J. Lee, J.H. Song, N.K. Lee, J.H. Kim, J.H. Oh, A. Chu, “Development of Micro Desktop Forming System for Fluid Dynamic Bearing Forming Process,” Proceedings of the 1st Int. Work. on Micro & Conver. Manuf. Tech., pp. 9-13, Korea (2009)
J. H. Oh, “Prediction of Temperature Distribution during Curing Thick Thermoset Composite Laminates,” Abstract in 8th International Symposium on Eco-materials Processing and Design (ISPED 2007), Kita-kyushu, Japan (Jan. 2007)
J. H. Oh, “Effect of Adhesive Thickness and Bonding Length on Behavior of Composite Adhesive Joints subject to Torsion,” Abstract in IUMRS International Conference in Asia, Jeju Island, Korea (Sept. 2006).
J. H. Oh, C. S. Lee, D. G. Lee and H. S. Kim, "Composite End Effector for Large LCD Glass Handling Robots," Proceedings of the 32nd International Symposium on Robotics, Seoul, Korea, pp. 394-399 (2001)
C. S. Lee, J. H. Oh and D. G. Lee, “High-speed Carbon/Epoxy Composite Sandwich Heddle Frame,” Proceedings of the Fifth International Conference on Sandwich Construction (5th ICSC), Zurich, Switzerland, Vol. 1, pp. 95-114 (Sep. 2000)
J. H. Oh, D. G. Lee and H. S. Kim, “Design and Manufacture of a Composite End Effector for Large LCD Glass Handling Robots,” Proceedings of the Second Asian-Australasian Conference on Composite Materials (ACCM-2000), Kyongju, Korea, Vol. 1, pp. 159-164 (Aug. 2000)
